Description

Edelbrock part #7576 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8’s and 318 c.i.d. engines with 340-360 cylinder heads. This RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes for years. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Accepts 1975 and earlier waterneck only. No provision for exhaust heated chokes and no exhaust crossover. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines. Includes nitrous bosses.

Specifications:

_LAB	RPM Air-Gap Small Block Chrysler Intake Manifold
_ASM	Chrysler:Small-Block LA-Series:340 (5.6L)/360 (5.9L)
_EXT	Edelbrock RPM Air-Gap Intake Manifold for 318-340-360 Chrysler Small Block LA engines
_MKT	Edelbrock part #7576 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8’s and 318 c.i.d. engines with 340-360 cylinder heads. This RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes for years. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Accepts 1975 and earlier waterneck only. No provision for exhaust heated chokes and no exhaust crossover. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines. Includes nitrous bosses.
_TRA	Recommended intake gasket: Edelbrock #7276, Fel-Pro #1213, Chrysler #4397642 (or equivalent) for 340 and 360
_TRA	Manifold height: A-4.9″, B-5.8″
_TRA	Carb pad height: 5.35″
_TRA	Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use #1481 or #1843 throttle/transmission lever kit.
_TRA	Port exit dimensions: .98″ x 2.16″
_TRA	1979 and later rotary A/C compressor will not clear waterneck
_TRA	Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
_TRA	Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
_ABR	Intake Mnfld
_INV	RPM Air-Gap 340-360 Intake Manifold
_DEF	Engine Intake Manifold